MTW Empty Mag Detection Traditional and Simplified Modes

The MTW Spartan Electronics board will automatically disable firing after the last BB is fired when using a Wolverine Airsoft MTW Magazine. Firing will resume in one of two ways depending on the following settings:

• Traditional (Default): To reset empty mag detection, the user must press the Bolt Catch after loading a new magazine.

• Simplified: The MTW will automatically reset empty mag detection when the magazine is removed without requiring use of the Bolt Catch. We recommend putting the MTW in simplified mode when using standard AEG magazines that do not have empty mag detection.

To change between Traditional and Simplified mode simply place the selector on semi and hold down the trigger and the bolt catch for 5 seconds.